Open source DIY solar photovoltaic racking

This page summarizes open source DIY solar photovoltaic racking approaches:

DIY approaches

• Distributed manufacturing of after market flexible floating photovoltaic modules - make your own FPV
• Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates - make your own BIPV
• Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases - for large scale systems
• Impacts of Location on Designs and Economics of DIY Low-Cost Fixed-Tilt Open Source Wood Solar Photovoltaic Racking - wood and hand tools
• Low-cost pole and wire photovoltaic racking - pole and wire/cables
• DIY PV fencing -- coming soon from Pearce group
• DIY Vertical PV racking -- coming soon from Pearce group
• DIY mobile cable-conduit PV racking -- coming soon from Pearce group
• DIY PV greenhouses (see also Scaling of greenhouse crop production in low sunlight scenarios) -- coming soon from Pearce group

Using a 3-D printer for PV racking

• 3-D Printing Solar Photovoltaic Racking in Developing World
• Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
• Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
• 3D printed photovoltaic module spacer - for use in installing roof-mounted conventional systems.
• DIY waste plastic PV racking -- coming soon from Pearce group

Lit reviews/methods

• Structural analysis of solar racking systems literature review
• Methodology of structural analysis of load bearing systems
• Solar pv racking
• Solar kiosks and parking lot awnings literature review
• Solar photovoltaic ground mounting
• Canadian PV Racking System Standards Literature Review

Open Source Photovoltaic Racking Approaches

• Ground-mounted
• 
  3-D Printing Solar Photovoltaic Racking in Developing World
• 
  Open-Source Vertical Swinging Wood-Based Solar Photovoltaic Racking Systems
• 
  Vertical Free-Swinging Photovoltaic Racking Energy Modelling: A Novel Approach to Agrivoltaics
• 
  Impacts of Location on Designs and Economics of DIY Low-Cost Fixed-Tilt Open Source Wood Solar Photovoltaic Racking
• 
  Open-Source Design and Economics of Manual Variable-Tilt Angle DIY Wood-Based Solar Photovoltaic Racking System
• 
  Low-cost pole and wire photovoltaic racking
• 
  Parametric Open Source Cold-Frame Agrivoltaic Systems
• 
  The potential for fencing to be used as low-cost solar photovoltaic racking
• 
  Geographic potential of shotcrete photovoltaic racking: Direct and low-concentration cases
• 
  Open-source Photovoltaic - Electrical Vehicle Carport Designs
• 
  Geographical Dependence of Open Hardware Optimization: Case Study of Solar Photovoltaic Racking
• 
  Solar photovoltaic wood racking mechanical design for trellis-based agrivoltaics
• 
  Wood and Cable-Based Variable Tilt Stilt-Mounted Solar Photovoltaic Racking System
• 
  Ballast-Supported Foundation Designs for DIY Low-Cost Open-Source Solar Photovoltaic Racking Systems
• 
  Distributed Manufacturing for Distributed Generation: 3-D Printed Solar Photovoltaic Module Mounting Mechanisms for Wood Racking
• 
  Mechanical and economic analysis of conventional aluminum photovoltaic module frames, frames with side holes, and open-source downward-fastened frames for non-traditional racking
• 
  Technical, Economic and Environmental Potential of Recycled Polycarbonate Solar Photovoltaic Frames

• Roof-mounted
• 
  Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
• 
  Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
• 
  Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems

• FPV
• 
  Distributed manufacturing of after market flexible floating photovoltaic modules