OSAT Wind Turbine

Designed by Michigan Tech students, this project aims to make renewable energy more accessible.

Device data
Manufacturing files https://www.thingiverse.com/thing:577603
Hardware license CERN-OHL-S
Certifications Start OSHWA certification
Project data
Type
Authors Lee Southerton
Status Designed
Prototyped
Years 2014
Made Yes
Replicated No

Bill of Materials

  1. PLA Plastic
  2. Files can be found on at [1]

Tools needed

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Lighter

Skills and knowledge needed

  • Knowledge how to operate a 3d printer
  • Knowledge of how to operate freecad if changes to blade needs to be made

Common Problems and Solutions

  • Rough edges can be smoothed out with lighter .
Page data
Authors Lee Southerton
License CC-BY-SA-3.0
Organizations Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777, MTU
Cite as Lee Southerton (2014–2025). "OSAT Wind Turbine". Appropedia. Retrieved November 28, 2025.
This article is issued from Appropedia. The text is available under CC-BY-SA-4.0 unless otherwise noted. Additional terms may apply for the media files.