GPS Belt Clip

Device data
Manufacturing files https://www.youmagine.com/designs/garmin-gps-clip
Hardware license CERN-OHL-S
Certifications Start OSHWA certification
Project data
Type
Authors Vmmclain
Status
Years 2016
Made No
Replicated No

As a member of Superior Search and Rescue, I find myself using a GPS frequently during training exercises or actual searches. At times, it can be inconvenient to continuosly remove my GPS from a pocket or backpack in order to navigate. This GPS clip is an attempt to alleviate that issue by allowing a user to mount a GPS to a belt, backpack strap, or other webbing attachment.

Bill of Materials

    1. 1.75mm Filament
    2. 2-Part Plastic Epoxy

Tools needed

  1. MOST Delta RepRap or similar RepRap 3-D printer

Skills and knowledge needed

  • 3D printer and slicing software for the provided STL's

Technical Specifications and Assembly Instructions

  1. Both the mount and clip will printed in under a half an hour
  2. Both files should be printed at 0.2 mm layer height with a 30% infill.
Page data
Authors
License CC-BY-SA-3.0
Organizations MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777
Cite as "GPS Belt Clip". Appropedia. 2016–2024. Retrieved November 28, 2025.
This article is issued from Appropedia. The text is available under CC-BY-SA-4.0 unless otherwise noted. Additional terms may apply for the media files.