Wooden handscrew-style clamps

Device data
Manufacturing files Vice Bar.stl
Handle Woodworking.stl
Threaded rod with hex.stl
Hardware license CC-BY-SA-4.0
Certifications Start OSHWA certification
Project data
Type
Authors Benjamin Holtz
Location Michigan, United States
Status Designed
Prototyped
Years
Made No
Replicated No
Uses development, industry

Clamps are an essential tool in building just about anything from scratch. This OSAT is intended to take the place of woodworking clamps. The source code is parametric, the size of the clamp is limited only by the size of the 3D printer.

Bill of Materials

  1. Only filament is required to build this OSAT
  2. Here are the STL files
    1. [1]
    2. [2]
    3. [3]

Tools needed

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. OpenSCAD Parametric modeling software http://www.openscad.org
  3. Download the ISO Metric Thread SCAD file from http://www.thingiverse.com/thing:311031. Inlcude this in the same folder as the main SCAD File
  4. Download this handscrew SCAD model.[ https://www.appropedia.org/File:Woodworking_Clamp.scad]

References

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the and <references />tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example:[1]
  1. ↑ web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://web.archive.org/web/20021201231338/http://www.eren.doe.gov:80/erec/factsheets/landscape.html
Page data
Authors Benjamin Holtz, Fionaconnor
License CC-BY-SA-3.0
Organizations MTU, MOST, MY4777
Cite as Benjamin Holtz, Fionaconnor (2014–2025). "Wooden handscrew-style clamps". Appropedia. Retrieved November 28, 2025.
This article is issued from Appropedia. The text is available under CC-BY-SA-4.0 unless otherwise noted. Additional terms may apply for the media files.